| Picture |
Heading |
Updated |
 |
2-16L Multilayer PCB Board
Product name: multilayer pcb board Characteristic Multilayer PCB is widely used in computercommunication, Consumer electronics,military and aerospace, medical and other fields Layer count:8 Board thickness:2.0mm Base materials:FR4 S1000-2 Finished size: 3 |
2017-08-27 |
 |
Immersion Silver PCB Board
Product name: Immersin Silver pcb Board Characteristic Layer count: 6 Board thickness: 1.60mm Base materials: FR4 S1000-2 Finished size:112*93mm Surface finish: Immersin Silver Line width/line space: 4/4mil Minimum hole: 0.25mm Solder resist color: Sensit |
2017-08-25 |
 |
Aluminum Board
Product name: Single sided aluminum substrate board Characteristic Layer count: 1 Board thickness: 1.0mm Base materials: aluminium base Finished size: 180*120mm Surface finish: OSP Line width/line space: 12/12mil Minimum hole: NA Solder resist color: whit |
2017-08-24 |
 |
Flex-Rigid Circuit Board
Product name:Flex-Rigid circuit board Characteristic Layer count: 4l + flex part: 2l Board thickness: 1.6mm+0.21mm Base materials: FR4+PI Finished size:201.93*87.39mm Surface finish:ENIG+hasl lf Line width/line space: 6/5mil Minimum hole: 0.4mm Solder res |
2017-07-26 |
 |
Half Plated Holes PCB Board
Product name: half plated holes pcb board Characteristic Layer count:4 Board thickness:1.2mm Base materials:FR4 S1141 Finished size: 144*132mm Surface finish: HASLLF Line width/line space: 6/6mil Minimum hole: 0.30mm Solder resist color: Sensitive green C |
2017-07-26 |
 |
Blind/buried Via Board
Product name:blindburied via board Characteristic Layer count: 8 Board thickness: 1.2mm Base materials: FR4 S1000-2 Finished size:205*174mm Surface finish:ENIG+OSP Line width/line space: 3/3mil Minimum hole: 0.10mm Solder resist color: Sensitive blue Cu t |
2017-07-16 |
 |
Stencil without Frame
description Produced by the latest laser stencil cutting machine from LPKF of German, the hole positon of stencil is accurate, and the hole shape has high accuracy . take the high-end fiber laser source , making the cut face more smooth, and it is process |
2017-07-13 |
Friends links